Tuesday, March 15, 2011

Nagios and IPv6 made easy with the mknagconf configuration generator

This article describes how to install Nagios3 and my mknagconf tool and how to use them. It should take about 30 minutes to install nagios3 and mknagconf and set it up to monitor a few hosts. The following has been tested with Ubuntu 10.04, 10.10 and 11.04 on an amd64 platform.

Nagios3 is an excellent monitoring engine, but the stock Nagios has some limitations in regard to dual-stack hosts. In the Nagios universe, one host is one ip address, and a secondary ipv6 address would require an extra host definition.

The Nagios packages which you are about to install have been patched to support this concept "one host = 1 ipv4 address + 1 optional ipv6 address". The mknagconf script makes it easier to maintain your Nagios installation. mknagconf takes small short, and simple definition files, parses them and generate the configuration files for Nagios. This will be explained after installing the required software.

Step 1: Install all dependencies
apt-get install apache2-mpm-prefork apache2-utils apache2.2-bin \
 apache2.2-common bsd-mailx libapache2-mod-php5 libapr1 \
 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap \
 libgd2-noxpm libjpeg62 libperl5.10 nagios-plugins-basic \
 php5-common postfix ssl-cert nagios-plugins-standard \
 nagios-plugins-extra git-core make
Step 2: obtain PGP key, configure apt to fetch updates from my repo

Add my PGP key to your apt setup and install the Nagios packages from my repository:
apt-key adv --keyserver keyserver.stack.nl --recv-keys 7E5BEC10
echo "deb http://snijders-it.nl/deb natty main" \
 > /etc/apt/sources.list.d/snijders-it.list
apt-get update
Step 3: install nagios

During the following step the Nagios installation will ask you for a password for the user 'nagiosadmin'. Don't forget to use a strong password!
apt-get install nagios3 nagios3-core nagios3-doc \
    nagios3-common nagios3-cgi
Step 4: download and install mknagconf

This step downloads the latest version of the script and example configuration files from github. After downloading you can run the ./install.sh script to copy all files to the correct place. This script will overwrite the current nagios configuration from Step 3.
cd /usr/srcgit clone git://github.com/SnijdersIT/mknagconf.git
cd mknagconf
sudo ./install.sh
Step 5 (optional): setup local repo for configs

It's usually good to do nagios stuff in some kind of repository, an example would be:
cd /etc/nagios3git init
git config --global user.name "your name"
git config --global user.email you@example.net
echo "conf.d/*_autogenerated.cfg" >> .git/info/exclude
git add *
git commit -am 'first nagios config'
Step 6: edit the hosts.def definition file

Open the following file in your texteditor:
/etc/nagios3/definitions/hosts.def
You will see a line like:
hpserv;192.168.23.4;2001:db8:1::65;coregate;central HP server

Which will be interpreted as: host 'hpserv' with ipv4 address "192.168.23.4" and ipv6 address "2001:db8:1::65", has 1 parent namely: "coregate" and is also called the "central HP server".

The ipv6 address, parents and human name are optional. You can specify multiple parents if you separate them with a comma. Don't forget to create a line specifying the parent itself!

Remove the hpserv line and add a (dual-stack) host you would like to monitor. Define one host per line. In the next step you can define what services you want to monitor on that host.

Step 7: edit the services.def definition file

Open the following file in your texteditor:
/etc/nagios3/definitions/services.def
You will see a line like:
hpserv = ping, ping6, ftp, ssh6
Which will be interpreted as: perform an IPv4 ping check, IPv6 ping check, an FTP connect over IPv4 and a SSH connect over IPv6 to host "hpserv". Define one host per line, and all services that should be checked on that host on the same line.

Step 8: configure correct contact

Open the following file and modify it according to your situation:
/etc/nagios3/conf.d/contacts.cfg
Step 9: generate configuration, reload nagios

Change to the nagios3 configuration directory, run the make commands to clean up the auto-generated files, compile the nagios configurations from the definition files and check if the configurations makes any sense.
cd /etc/nagios3
make cleanmake
make check && /etc/init.d/nagios3 reload
git commit -am 'added my first hosts' # optional step

For more information open the various files in /etc/nagios3/definitions/ and read their headers. Further recommended reading: the README file in /usr/src/mknagconf/

If at some later point you want to add more hosts or delete old ones, just go through step 6, 7 and 9.

That's it! Have fun using Nagios :-)

1 comment:

Nicolas Frei said...

Looks really easy, but I still prefer to work with http://www.softinventive.com/total-network-monitor/. It's simpler and more effective when we are talking about IPv6.